CP210x USB to UART Bridge VCP Drivers. The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.These drivers are static examples detailed in application note 197: The Serial Communications Guide for the. Mac OS X Universal Binary Driver v2.0.0 (PKG file format) For Mac OS High Sierra (version 10.15) - see NOTE below. (Chip Rev A) USB to Serial Controller ICs using Prolific's trademark logo, brandname, and device drivers, were being sold in the China market. For windows usb serial adapter cables using prolific chip also mac and linux drivers for usb serail cables as well as x86 64-bit drivers for prolific chip serial cables usb serial driver. Download PL2303ProlificDriverInstallerv1.9.0.zip Windows Driver Installer Setup Program (For PL2303 HXA, XA, HXD, EA, RA, SA, TA, TB versions).
Installation of the PL2303 and CH340 / CH341 / HL340 drivers is easy.Simple open the OS X installer and follow the steps.
Step 1 - Download Driver¶
Download the driver for your OS X version from the download dashboard:
Step 3 - Start screen¶
Step 4 - Select install location¶
Default is most times the right choice.
Step 6 - Driver has been installed¶
![Drivers Drivers](/uploads/1/2/6/5/126513724/731640708.jpg)
![Usb To Serial Drivers For Mac Usb To Serial Drivers For Mac](/uploads/1/2/6/5/126513724/818228232.jpg)
Step 7 - Check¶
When the driver has been installed, you can check if it has been loaded.To check, connect the serial device, open Terminal and type one of thefollowing commands:
Usb To Serial Driver Mac Mojave
- For PL2303 device:
ls/dev/|grep2303
- For CH341 device :
ls/dev/|grepch341
Usb To Serial Driver For Mac
The result should show the accompanying cu and tty handle.